Specs
Safety Card specs
Setup notes and briefing numbers for Safety Card.
Safety Card placement on site
The Safety Card specs page sets out the formal detail that supports the safety reference used on site. It helps teams check the required notices, positions and system links for the plant area concerned.
Safety Card specs cover the notice size, fixing method and viewing position used at a working plant area. Details change with glare from high-bay lighting, washdown routines, forklift traffic and whether the point is indoors, under canopy or exposed to coastal air. Johannesburg dust, Durban humidity and Cape Town wind at open loading points all affect how the card is mounted and checked.
Start by recording the exact location before boards, cones or barriers are moved. The specification normally lists the card holder, fastener type, mounting height and the linked system reference for that bay, line or access point. During shift handover, that written reference helps supervisors verify they are reading the correct notice for the area in use.
What the spec sheet records
The Safety Card on site needs its formal points pinned down: the plant area, the notice position, the matching system link and any numbering used in the briefing set. For audit checks, that matters more than a vague mention of a sign near the line.
Cross-check Safety Card specs against the area drawing, plant reference and current notice list before new copies are issued.
- Card size and mounting height listed
- Notice position verified at the area
- Contact route for specification queries
Site conditions that affect notices
Plants near OR Tambo freight movement, older buildings in Crown Mines and busy warehouse strips around Sunnyrock often need different fixing details for the same Safety Card format. Masonry, cladding, mesh guarding and painted steel all take hardware differently. If a notice point sits near heat, wash bays or frequent pallet movement, the spec should state that plainly.
Coastal salt and cleaning chemicals can shorten the life of clips, sleeves and printed inserts. Inland dust settles on covers and can reduce legibility where cards are placed near doors or extraction routes. Load-shedding also changes inspection timing, especially where the card must remain readable under backup lighting.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Safety Card briefing details
Send site photos, the card number, the plant area name and any failed notice history with the Safety Card brief. Include whether the board is wall fixed, mesh mounted or attached to a post. That gives the spec a proper base instead of a rough description from memory.
File the specification with the area record on the same day, while locations and numbering still match the site walk-through. When procurement or safety staff need an audit trail, pair it with the project note and resource sheet used for the plant section concerned.
What our Industrial Plant customers say
Verified Google reviews